VEVOR
VEVOR 6600 lbs Chain Binder 5/16-3/8 G70 Hooks 24-31 in Adjustable 14 in Handle 2 Pack
$52.99
0.00065335BTC
In stock
VEVOR 3/4" D-Ring Shackle 2 Pack Red 30T
Pair of 3/4″ alloy-steel D-ring shackles rated to 30 T breaking strength with 7/8″ screw pins, isolators and washers for heavy-duty off-road recovery
- Overall width5.91
- Two shackles in one pack for ready spares
- 30-ton break strength rated at 66139 lbs
- 7/8-inch screw pin made from 40Cr steel
- #45 steel body with red powder coat finish
- Includes isolators and washers to reduce noise
Two-Pack 30-Ton Recovery Shackles
This pair of alloy-steel D-ring shackles is rated for a 30-ton breaking strength and an 8-ton work load limit, making them suitable for heavy off-road recovery of Jeeps, trucks and similar vehicles. Each shackle uses #45 steel for the ring and 40Cr steel for the 7/8-inch screw pin.
Threaded Pin with Isolators
The 7/8-inch screw pin threads directly into the shackle ears, so no tools are required beyond hand tightening; the included isolators and washers reduce metal-on-metal noise and protect the pin threads from dirt. Over-tightening the pin after a load can make it difficult to unscrew by hand later.
Check Pin Diameter and Inner Clearance
Verify that your recovery points, tow hooks or snatch-block openings accept a 22 mm pin and that the 52.8 mm inner diameter clears your strap, rope or chain thimble. The 21.5 mm wire diameter determines the minimum bend radius for any synthetic or wire rope you intend to use.
How it compares
Measured against everything we stock in Winches & Towing Accessories, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 59% of the 27 comparable items (median $35.99).
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the 3/4 inch D-ring shackle is seated correctly after installation?
The 7/8 inch screw pin should thread fully into the #45 steel body until the 0.85 inch wire diameter bow sits flush, with the black 40Cr steel pin showing no gap and the red isolators compressed evenly.
What comes in the package and what must I supply myself?
The box contains two complete shackles each with a 7/8 inch pin, red isolators and washers already fitted; you only need to provide a compatible recovery strap or winch line that fits the 2.08 inch inner diameter.
Which capacity should I choose for a Jeep recovery kit?
This 30 ton breaking strength model with an 8 ton work load limit suits typical Jeep and truck recovery; select it when your maximum expected pull stays below 17636.98 lbs.
More in Winches & Towing Accessories
