VEVOR 6003-128mm-black insulation 52 sq ft 50 mil 47 pcs
Butyl-based sheets cover 52 sq ft at 50 mil thickness to damp vibration and reduce cabin noise
- Overall width10.83
- Covers 52 sq ft with 47 self-adhesive panels
- 50 mil butyl layer blocks road noise and vibration
- 3 mm thickness adds mass without reducing cabin space
- Each sheet 9.8 x 15.7 in for easy contour fitting
- 29 kg total weight damps low-frequency resonance
What this kit covers
The VEVOR 6003-128mm-black kit supplies 52 square feet of 50 mil butyl-based sound deadening material across 47 individual sheets. Each sheet measures 9.8 by 15.7 inches and the total package weighs 22.685 pounds. It is intended for automotive interior panels where vibration damping and noise reduction are required.
Thickness determines damping mass
At 50 mil (1.3 mm) the butyl layer provides the mass needed to lower panel resonance in doors, floors and roof sections. The silver aluminium facing adds a thermal barrier while keeping the sheets flexible enough for curved surfaces. Coverage of 52 sq ft is the figure that decides whether one kit finishes the job or a second is necessary.
Suited for full-vehicle treatment.
Builders planning to treat every major panel in a car, van or truck will find the sheet count and total area convenient. Installers who only need a few small pieces for a single door or boot lid should look at smaller packs because the 47-piece quantity and 22.685-pound weight make this kit excessive for limited applications.
How it compares
Measured against everything we stock in Sound Deadening & Insulation, at today’s prices. Recalculated every night.
- Price $38.99
- Pricier than about 71% of the 15 comparable items (median $23.99).
Specifications
No published specifications for this item yet.
Questions about this item
How much floor area does the 52 sq ft rating actually cover once the 47 pieces are laid in a vehicle?
The 47 pieces each measure 9.8 by 15.7 inches, giving a combined coverage of 52 square feet when installed with minimal gaps.
What does the 50 mil thickness mean for the butyl layer when it is pressed against metal panels?
At 50 mil (1.3 mm) the butyl-based mat conforms to curves and resists vibration without adding bulk that would interfere with trim reinstallation.
Will the 10.83 inch roll width fit through standard door openings for installation?
Each sheet is 9.8 inches wide, so it passes through typical door apertures and can be handled inside the cabin without folding.
More in Sound Deadening & Insulation
