We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium alloy pneumatic staple gun with extended nose and 150-staple magazine

VEVOR

VEVOR MT8016LN 21-Gauge Pneumatic Staple Gun 1/2" Crown 1/4-5/8" 150pcs Mag 70-100 PSI

SKU CH-1K7A-2WSYV

A 21-gauge pneumatic stapler for 80-series fine-wire staples with a 1/2-inch crown, 1/4 to 5/8-inch length range, 150-staple magazine, and 70 to 100 PSI operating pressure

  • Drives 150 staples per load for fewer reloads
  • Extended 220 mm nose reaches tight corners
  • Fires 80 series staples from 6 mm to 16 mm
  • Operates at 70 to 100 PSI with 1/4 NPT inlet
  • Lightweight 1.1 kg aluminium alloy body reduces fatigue

21-Gauge Pneumatic Staple Gun

The VEVOR MT8016LN is a 21-gauge pneumatic staple gun built for 80 series fine wire staples. It accepts 1/2-inch crown staples from 1/4 to 5/8 inch in length. A 150-piece magazine reduces reload frequency during extended work sessions.

Upholstery and detail woodworking

The long-nose design reaches tight corners and confined spaces common in upholstery, cabinetry and trim tasks. Users needing wider crowns, heavier gauge wire or cordless operation should consider a different tool class.

70 to 100 PSI operating pressure

The gun requires a compressed-air supply regulated between 70 and 100 PSI through a 1/4-inch NPT inlet. Verify your compressor delivers consistent pressure in this range before purchase.

How it compares

Measured against everything we stock in Air & Hydraulic Power Tools, at today’s prices. Recalculated every night.

Price $58.99
Typical for this category: the median of 243 items is $61.99.

Specifications

No published specifications for this item yet.

Questions about this item

How far can the 1/4 to 5/8 inch staples reach into material when driven at 70 to 100 PSI?

The gun drives 80 series fine wire staples from 6 mm to 16 mm long; at the rated 70 to 100 PSI they penetrate wood, fabric or insulation to the full staple depth.

What does the 1/4 inch NPT air inlet mean for my compressor hose?

The tool uses a standard 1/4 inch NPT thread, so it connects directly to common shop air hoses and quick-couplers without adapters.

Will the 220 x 190 x 45 mm body fit inside a 90 mm deep cabinet rail?

The gun measures 8.66 x 7.48 x 1.77 inches, so its 45 mm thickness clears a 90 mm rail with room for the extended nose.

More in Air & Hydraulic Power Tools

Similar items