We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel tilt TV wall mount with dual arms and wall plate

VideoSecu

VideoSecu MF608B-A17 Tilt TV Wall Mount 32-70" 165lbs

SKU CH-AF8K-QSH9J

Tilt TV wall mount fits 32-70 inch screens up to 165 lbs with VESA patterns from 200x100 to 600x400 mm and includes a 10 ft HDMI cable

  • Product nameTilt TV Wall Mount
  • Mounting typeMounting Bracket
  • AdjustabilityOne touch tilting +/- 15º
  • Supported TV size< 70 in
  • TV weight limitMax. load 165 lb
  • VESA compatibility600 × 400 /600 × 300 /500 × 300 /400 × 400 /400 × 300 /400 ×
  • Tilt up or down 15 degrees with one touch for glare-free viewing
  • Holds TVs up to 165 lbs on dual 13-gauge steel frames for secure mounting
  • Fits VESA patterns from 200x100 mm to 600x400 mm across 32 to 70 inch screens
  • Slide TV horizontally on wall-plate rails to centre the display perfectly
  • Includes 10 ft HDMI cable and 6 inch magnetic bubble level for easy setup

Tilt Mount for 32-70 Inch TVs

The VideoSecu MF608B-A17 is a tilt wall bracket designed for flat-panel displays from 32 to 65 inches, with support for some LED models up to 70 inches. It suits living rooms, bedrooms or offices where a fixed position is too limiting but full-motion articulation is not required. The one-touch mechanism lets users adjust the viewing angle by hand without tools. It is not for buyers who need swivel, extension or portrait orientation.

165 lb Capacity Across VESA 200-600 mm

Dual 13-gauge steel frames carry up to 165 lbs, covering VESA patterns from 200x100 mm through 600x400 mm and any hole spacing within 200-600 mm wide by 100-400 mm high. The +/- 15 degree tilt range handles glare reduction and high-mount scenarios comfortably. Heavier displays beyond 165 lbs or VESA patterns outside the stated range exceed the mount's rated limits.

Horizontal Slide and Cable Access Free Placement

The wall plate includes horizontal rails so the screen can be centred after the bracket is fixed to studs. Large openings in the plate simplify cable routing behind the display. A lift-and-lock design secures the TV once positioned. The package includes a 10 ft HDMI cable and a 6 inch magnetic bubble level for installation. It does not suit walls without adequate structural support or installations that demand recessed, in-wall cable concealment.

How it compares

Measured against everything we stock in TV Wall Mounts & Install Kits, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 87% of the 1,540 comparable items (median $47.99).

Specifications

Product
Brand nameVideoSecu
Model nameMf608b-A17
Product nameTilt TV Wall Mount
Size & build
Mounting typeMounting Bracket
AdjustabilityOne touch tilting +/- 15º
TV weight limitMax. load 165 lb
VESA compatibility600 × 400 /600 × 300 /500 × 300 /400 × 400 /400 × 300 /400 × 200 /300 × 300 /300 × 200 /200 × 200 /200 × 100 mm or any holes patterns within 200-600 mm wide and 100-400 mm high
Compatibility
Supported TV size< 70 in

Questions about this item

Will this mount still fit a 65-inch panel that uses the 400x400 VESA pattern on my existing wall studs?

Yes, the bracket supports VESA patterns from 200x100mm up to 600x400mm, so a 400x400 screen mounts directly without new holes.

How can I confirm the one-touch tilt is set to the full 15-degree angle after installation?

Use the included 6-inch 3-axis magnetic bubble level on the top rail; when the bubble centres at the 15-degree mark the tilt is at maximum.

Does the package include the lag bolts and concrete anchors needed for a brick wall, or must I buy them separately?

The box supplies the mount, a 10ft HDMI cable, the 6-inch magnetic level and standard wood-stud hardware; masonry anchors are not included.

More in TV Wall Mounts & Install Kits

Similar items