Vision BL HDMI Splitter 1×2 Male to Dual Female 30 cm 1080p Mirror Only

One-to-two HDMI mirror splitter

This Vision BL cable splits a single HDMI source into two female outputs so the same image appears on both displays simultaneously. It is intended for users who want to duplicate a 1080p signal from a Blu-ray player, game console or similar device to two televisions or monitors without extending the desktop. The 30 cm male-to-female cable arrives ready to plug in with no external power required. Gold-plated contacts are used to maintain signal integrity across the short run.

Mirror-only 1080p limitation

The splitter supports 480i, 480p, 720p, 1080i and 1080p resolutions but cannot extend or span content across the two screens. Only one output device should be active at a time unless both connected displays are exactly the same size, in which case both will show the mirrored image together. HDCP-protected sources such as streaming boxes or a MacBook are not supported, and the cable will not pass a signal to a TV box or cable box.

Passive 30 cm cable under continuous use

Because the unit draws no external power, it relies entirely on the source device to drive both outputs over the 30 cm length. In sustained operation the gold-plated connectors resist oxidation and the short cable run keeps attenuation low, so the mirrored 1080p picture remains stable for extended viewing sessions. The 52 g weight adds negligible strain on the source HDMI port during permanent installation.