We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A small rectangular green circuit board M.2 2280 SSD with black chips and gold edge connector

VisionTek

VisionTek 901565 DLX4 1 TB internal SSD

SKU CH-P1G4-GHCF5 MPN 901565

M.2 2280 PCIe 4.0 x4 drive with 1 TB 3D NAND, 5200 MB/s read, 4370 MB/s write, 500 TBW and 256-bit AES encryption

  • Total capacity1 TB
  • Sequential read speedUp to 5,200 MB/s
  • Sequential write speedUp to 4,370 MB/s
  • Interface typePCI-Express 4.0 x4
  • Form factorM.2 2280
  • Product typeInternal Solid State Drive (SSD)
  • Fast sequential reads up to 5200 MB/s for quick file access
  • Sustained sequential writes up to 4370 MB/s for large transfers
  • Responsive random performance with 195K read and 289K write IOPS
  • 256-bit AES encryption protects stored data
  • Rated for 500 TB written and 1,500,000 hours MTBF

VisionTek DLX4 1 TB consumer SSD

The VisionTek DLX4 1 TB is an internal solid state drive built for consumer workloads. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 link. The drive carries the model number 901565 and is based on 3D NAND components.

500 TBW endurance and 5200 MB/s sequential headroom

The drive is rated for 500 TB of writes and delivers up to 5200 MB/s sequential read with 4370 MB/s sequential write. Random performance reaches 195K IOPS read and 289K IOPS write. Sustained heavy workloads will eventually hit the controller thermal ceiling because the module ships without a heatsink.

NVMe 1.4 protocol over PCIe 4.0 x4 lane limits

The NVMe 1.4 protocol runs over four PCIe 4.0 lanes, capping theoretical bandwidth at the interface maximum. Real-world throughput depends on host platform lane allocation and thermal conditions. The Innogrit IG5220 controller manages encryption with 256-bit AES compliance.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $455.99
Pricier than about 78% of the 1,994 comparable items (median $180.49).
Total capacity 1 TB
Typical for this category: the median of 1,368 items is 1 TB.
Sequential read speed Up to 5,200 MB/s
Higher than about 71% of the 1,180 comparable items (median 2,400 MB/s).
Price per TB $455.99 per TB
Pricier than about 85% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameVisionTek
Product lineDLX4
Model name901565
Part number901565
Total capacity1 TB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speedUp to 5,200 MB/s
Sequential write speedUp to 4,370 MB/s
Random read (4K)195K IOPS
Random write (4K)289K IOPS
Storage
NAND flash type3D NAND
Controller chipInnogrit IG5220
Data encryption256-bit AES Compliant Data Encryption
Write endurance500 TB
Connectivity
Connection protocolNVMe 1.4
Ports & slots
Interface typePCI-Express 4.0 x4
Power
Idle power draw0.3 W
Active power draw4.75 W
Size & build
Form factorM.2 2280
Heat sinkWithout HeatSink
Overall width80.0 mm
Product depth22.0 mm
Product weight7g
Shipping weight0.45 kg
Package size112 × 97 × 10 mm
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-40 °C to 85 °C
Operating humidity range5-95%
Max shock tolerance1500G/0.5 ms
Vibration tolerance2-500 Hz, 3.1G
More details
Mean time between failures1,500,000 h

Questions about this item

Will the DLX4 1 TB M.2 2280 fit and run in a motherboard that only has PCIe 3.0 slots?

Yes, the drive is backward compatible and will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 M.2 slot, though sequential speeds will be limited to the slot's maximum bandwidth.

How can I verify the 901565 is delivering the rated 5200 MB/s read and 4370 MB/s write after installation?

Run a benchmark tool such as CrystalDiskMark using the NVMe 1.4 protocol on a PCIe 4.0 x4 link; results should approach the published sequential figures and show random read/write IOPS near 195K and 289K.

Does the VisionTek 901565 package include a heatsink or mounting screw, or must I buy them separately?

The drive ships without a heatsink; a motherboard M.2 standoff and screw are typically required for installation and are not included in the box.

More in Internal NVMe & SATA SSDs

Similar items