Vszerda 12VHPWR ATX 3.0 PCIe 5.0 to 3x ATX 8P 90° internal power cable

12VHPWR angled adapter for high-power GPUs

This Vszerda adapter converts a single 12+4 pin 12VHPWR connection into three standard ATX 8-pin plugs. It is built for graphics cards that follow the ATX 3.0 and PCIe 5.0 specifications, such as the RTX 3090 Ti, 4070 Ti, 4080 and 4090. The 90-degree upward angle eases routing in tight spaces around the card's power socket.

90-degree connector clears side-panel room

The right-angled head lets the cable sit flush against the GPU, freeing millimetres between the card and the case side panel. This helps builders fit wider graphics cards into narrower chassis without bending wires sharply. Three separate 8-pin tails connect directly to a modular power supply, so no extra splitters or daisy-chained cables are required inside the case.

600-watt delivery with PCI-SIG H+ signalling

The cable carries the full 12-pin power path plus the 4-pin sense lines defined by the PCI-SIG 12VHPWR H+ standard, supporting up to 600 W of continuous power. It matches the needs of current flagship RTX cards and the upcoming 5090 class. Builders using power supplies that only offer 8-pin PCIe outputs gain a certified path without exceeding the adapter's rated headroom.