TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Share two computers on one monitor, keyboard and mouse with HDMI 2.1 video up to 8K@60Hz or 4K@120Hz and USB 3.0 peripheral ports
This HDMI 2.1 KVM switch lets you operate two USB-enabled computers from one keyboard, one mouse and one display. It provides two HDMI 2.1 inputs and a single HDMI 2.1 output plus USB 3.0 and USB 2.0 ports for peripherals. The unit is aimed at desk setups that need to share a high-refresh monitor between two hosts without unplugging cables. Switching is handled by a front-panel button or the supplied wired remote.
The HDMI 2.1 video processing chip passes resolutions up to 8K at 60 Hz and 4K at 120 Hz with dynamic HDR and HDCP 2.3 compliance. This specification decides whether the switch can drive your monitor at its native refresh rate and colour depth. Both HDMI and USB cables must be connected to each computer for the link to negotiate correctly.
Because the switch maintains a continuous HDMI 2.1 handshake and keeps USB 3.0 channels active, it sustains high-bandwidth video and peripheral traffic during long sessions without dropping the signal. The design has no keyboard hotkey mode, so input changes rely only on the physical button or remote, avoiding accidental switches during intense work or gaming.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
No published specifications for this item yet.
The switch passes an 8K signal at up to 60 frames per second from either computer to the display, provided the monitor and cables also support HDMI 2.1 bandwidth.
It uses HDMI 2.1 with HDCP 2.3, capping video at 8K 60 Hz or 4K 120 Hz and allowing protected 4K/8K content to pass through.
Each computer needs one HDMI 2.1 cable and one USB 3.0 cable connected to the switch; the monitor uses one HDMI 2.1 cable, and the included power cable and button extension cable complete the setup.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?