We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three beige rectangular adapters with FC male and LC female connectors, ceramic sleeves, single mode 9/125um

Vszerda

Vszerda 3-Pack FC/UPC Male to LC/UPC Female Adapter Single Mode 9/125um

SKU CH-G8X9-21FRZ

Three adapters join FC/UPC male to LC/UPC female connectors in single-mode 9/125 µm fibre, each rated for 0.2 dB insertion loss, 50 dB return loss at 1310 nm and 1550 nm.

  • Connector countNo Plug
  • Product typeFiber Optic
  • Low insertion loss of .2 dB at 1310 nm and 1550 nm
  • High return loss of 50 dB at both 1310 nm and 1550 nm
  • Ceramic sleeve withstands -40 °C to 95 °C operating range
  • Rated for over 1000 mating cycles for long-term reliability
  • Connects FC patch cables to LC patch cables and aids visual fault location

FC Male to LC Female Adapter Pack

This three-pack of single-mode fiber adapters converts an FC/UPC male connector to an LC/UPC female interface. Each unit bridges 9/125 µm patch cables for telecommunications, CATV maintenance, and optical measurement projects. The ceramic-and-metal sleeve construction supports over one thousand mating cycles.

Suits technicians joining FC and LC patch cords

Installers who need to verify link continuity with a visual fault locator will find these couplers convenient. The adapters operate from minus forty to ninety-five degrees Celsius. Buyers requiring multi-mode alignment or angled-polish connectors should look at alternative products.

Low insertion and return loss figures

At 1310 nm and 1550 nm the insertion loss is 0.2 dB and return loss reaches 50 dB, preserving signal integrity across the link. The wide temperature range and flame-retardant housing maintain performance in harsh environments. No additional software or licensing is included.

How it compares

Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 70% of the 812 comparable items (median $29.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand namePoyiccot
Product typeFiber Optic
Ports & slots
Connector countNo Plug

Questions about this item

What type of fiber patch cables must I already own to use these FC/UPC male to LC/UPC female adapters?

You need an FC-terminated patch cable on one side and an LC-terminated patch cable on the other, both single-mode 9/125 µm, to connect through the adapter pair.

Will these adapters introduce noticeable loss when inserted between legacy FC and LC patch cords in an existing single-mode link?

Insertion loss is rated at 0.2 dB at 1310 nm and 1550 nm with return loss of 50 dB, so the adapters add minimal attenuation to legacy cords.

How can I verify the adapters are passing light correctly after I connect them in the patch panel?

Use a visual fault locator at 1310 nm or 1550 nm; visible red light through the LC end confirms continuity and proper alignment.

More in Fiber Optic Patch Cables

Similar items