We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black braided 13 inch fan splitter cables with five 4-pin connectors each

Vszerda

Vszerda 4-Pin PWM Fan Splitter 1-to-5 Hub 13 inch 2 Pack internal power cable

SKU CH-RFAV-J13R2

A 1-to-5 PWM fan hub connects five 4-pin or 3-pin fans to one motherboard header using 13 inch braided cables

  • Expands one header to five fans with 1-to-5 PWM splitter
  • Supports both 4-pin and 3-pin fan connectors for broad compatibility
  • Black nylon braided sleeves protect wires and keep the build tidy
  • Plug-and-play 4-pin male connector requires no extra configuration
  • 13 inch length gives flexible routing between motherboard and CPU coolers

1-to-5 PWM fan hub for case builds

The Vszerda splitter turns one motherboard 4-pin PWM header into five fan connections. Each hub is 13 inches long and wrapped in black sleeved nylon braiding. Two hubs are included so multiple fan groups can be managed from separate headers. The cables connect directly without software or adapters.

Builders adding several case or CPU fans

Suits anyone expanding cooling with 4-pin PWM or 3-pin fans on a standard ATX board. The hub draws all power from the single motherboard header, so total current must stay within that header’s limit. Not suited for setups needing independent speed curves per fan or external controller boxes.

13-inch cable length per hub

The fixed 13-inch reach decides whether the hub spans from the header to your fan cluster. Measure the motherboard-to-fan distance before buying; longer runs will need a different cable.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 92% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 1-to-5 PWM fan splitter and what step is often missed?

Connect the single 4-pin male end to a motherboard fan header, attach up to five 3-pin or 4-pin fans to the hub, and ensure the motherboard connector is seated firmly before powering on.

What maintenance or replacement will the 13 inch braided splitter cable need over time?

Inspect the nylon braided sleeving and connectors for dust build-up or loose pins during routine PC cleaning; replace the cable if any connector becomes damaged or intermittent.

What limit appears first when running five fans continuously from one motherboard header?

The motherboard header's current rating limits total fan draw; if combined fan amperage exceeds that rating, the header or splitter can overheat and shut down.

More in Internal PSU & Riser Cables

Similar items