Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a 12V 4-pin PSU connector to an 8-pin EPS motherboard socket using 18AWG copper conductors in a 6-inch cable
This adapter cable converts a power supply's 12V 4-pin ATX connector into an 8-pin EPS motherboard CPU power connector. It is intended for builders using a PSU that only provides a 4-pin P4 auxiliary plug with a motherboard requiring an 8-pin EPS socket. The cable cannot be used for graphics cards; connecting it to an 8-pin video card power input will cause damage.
The cable uses 18AWG copper conductors to carry 12V power between the PSU and motherboard. As a passive wiring assembly it generates no noise and adds negligible thermal load to the system. Power delivery is limited by the source 4-pin connector and the 18AWG wire gauge.
Under continuous CPU load the adapter simply passes whatever current the 4-pin PSU connector supplies through the 18AWG wires to the 8-pin motherboard header. No active components alter voltage or current, so behaviour mirrors the PSU's own 12V rail stability. The 6-inch length keeps voltage drop minimal for typical desktop layouts.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Plug the PSU's 4-pin female P4 connector into the adapter's matching female end, then insert the adapter's 8-pin male EPS connector into the motherboard CPU power socket; the 18AWG copper conductors carry 12 V on both sides.
No scheduled maintenance is required; periodically check that both the 4-pin and 8-pin connectors remain fully seated and free of dust or corrosion.
The 4-pin P4 source is rated for 12 V delivery, so the adapter cannot supply more current than the PSU's 4-pin rail provides, which becomes the limiting factor under heavy load.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?