TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A dual-monitor KVM switch lets two computers share two 4K@60 Hz displays, keyboard, mouse and five USB 2.0 ports via push-button or wired remote
The Vszerda switch lets one keyboard and mouse control two computers across two HDMI displays. Each PC must provide dual HDMI outputs for the setup to work. Five USB 2.0 ports handle keyboard, mouse and an extra peripheral such as a gamepad or SSD. A wired remote button and a front-panel push button give two ways to change the active system. The unit ships with USB power and data cables.
No fans are present; the aluminium chassis dissipates the modest heat from the HDMI 2.0 and USB 2.0 circuitry. A supplied USB power cable feeds the switch to keep signal integrity stable during normal desktop use. Operation is silent because there are no moving parts. The IP00 rating means the enclosure is not sealed against dust or moisture.
HDMI 2.0 and HDCP 2.2 compliance let both monitors run at 4K 60 Hz for extended sessions without bandwidth throttling. The supplier notes that EDID emulation is absent, so displays may need a manual resolution reset after each switch. Standard-quality HDMI cables are recommended to avoid flicker on longer runs. The switch maintains the link as long as the USB power source remains active.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | LUKFOCAB |
| Model name | 4K USB2.0 KVM Switch 2 PC 2 Monitors |
| Part number | BO08-DC |
| Product type | Push Button |
| Ports & slots | |
| Monitor ports | USB 2.0 2 PC 2 Monitors (HDMI+HDMI) |
| Size & build | |
| Product dimensions | 3.94 in × 1.97 in × 1.18 in |
| Product weight | 0.531 kg |
| More details | |
| Switching method | Push Button |
Connect each PC using one HDMI cable and one USB 2.0 data cable, plug the monitors into the two HDMI outputs, attach keyboard and mouse to the dedicated USB 2.0 ports, then connect the included USB power cable to a 5 V source; the step often missed is powering the unit before switching.
The wired remote uses a simple push-button actuator rated for two positions and the USB power cable is a standard 2.0 lead; both are passive parts with no batteries or firmware, so only physical wear on the button or cable jacket would ever require replacement.
The HDMI 2.0 bandwidth ceiling of 18 Gbps is the first hard limit; it caps dual 4K@60Hz to 8-bit colour and leaves no headroom for higher refresh rates or deeper colour formats.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?