Vszerda 9pin USB 2.0 Male 1 to 4 Extension Cable with SATA Power Magnetic Base
Connects a motherboard 9-pin header to four USB 2.0 ports with SATA power and a magnetic base for flexible case mounting
- Build detailsCopper
- Up to 480 Mbps USB 2.0 transfer speeds
- Works with Windows, Mac, Linux and Chrome OS
- Plug and play with no driver installation required
- 5V LED indicator shows power status at a glance
- Magnetic base allows flexible, repeatable mounting in the case
Internal USB 2.0 Header Hub
The Vszerda cable splits a single motherboard 9-pin USB 2.0 header into four 9-pin connectors, adding internal ports for card readers, front-panel hubs or other header devices. It draws supplementary power through a SATA connector and includes a 5V LED that confirms the hub is active. Data rates reach 480 Mbps on USB 2.0 and 12 Mbps on USB 1.1. The magnetic base lets the hub attach securely to the steel chassis floor.
Builders adding internal USB devices
Suits enthusiasts who need extra 9-pin headers for front-panel accessories, internal card readers or Bluetooth modules and have a spare SATA power plug. Not suited for external peripherals, for systems lacking a 9-pin header or a SATA power cable, or for anyone requiring USB 3.0 or higher transfer speeds.
Simple header installation
Connect the 30 cm 2*5P lead to the motherboard 9-pin header, plug the SATA lead into a power-supply cable, then attach the hub to the case floor using the magnetic base. The hub is plug-and-play with no driver needed on Windows, Mac OS X, Linux or Chrome OS. A common issue is forgetting the SATA power connection, which leaves the LED unlit and the extra headers inactive.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Size & build | |
| Build details | Copper |
Questions about this item
Does my motherboard need a spare 9-pin USB 2.0 header to use this hub?
Yes, the hub plugs into one motherboard 9-pin USB 2.0 header and provides four 9-pin headers for front-panel ports.
Will the hub work with USB 1.1 devices I still have?
The hub supports USB 1.1 at 12 Mbps and USB 2.0 at 480 Mbps, so legacy devices will operate at their rated speed.
How can I confirm the hub is receiving power after installation?
A 5 V LED on the hub lights up when the SATA power cable is connected and the system is on.
More in USB Cords & Extension Cables
Similar items
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4





