We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ATX 24-pin male to dual female splitter cable with sleeved wires

Vszerda

Vszerda ATX 24Pin 1 To 2 Splitter Extension Cable

SKU CH-DWR2-56549

Splits one 24-pin ATX connector into two female ports for powering dual devices from a single PSU

  • Splits one 24-pin PSU connector into two female ports
  • Extends reach of the motherboard power cable for easier routing
  • Male-to-female design keeps the original PSU plug intact
  • Supports standard ATX 24-pin power delivery

ATX 24-Pin Dual-Splitter Cable

This ATX 24-pin splitter takes a single power-supply connector and provides two female ports, letting builders run dual 24-pin loads from one PSU. It suits test benches, dual-system chassis or custom loop setups that need an extra motherboard power tap without a second supply.

Male-to-Female Wiring For Direct Use

The male end plugs straight into the PSU while each female end accepts a standard 24-pin motherboard or extension cable, so no adapters or re-pinning are required. Builders who need more than two 24-pin connections or who require isolated ground planes for sensitive measurements should look elsewhere.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 60% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does the 24-pin ATX splitter carry the same pinout as a standard motherboard power connector?

Yes, the male plug and both female sockets follow the standard 24-pin ATX pinout, so each connected device receives the correct voltage and ground arrangement.

How much clearance should I allow behind the motherboard tray for the 24-pin male plug and two female sockets?

The male plug and each female socket sit flush with a standard 24-pin header; allow enough depth for the cable bend radius plus the connector body so the splitter does not press against the case panel.

More in Internal PSU & Riser Cables

Similar items