We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular DC-DC boost converter board with soldered input and output wires

Vszerda

Vszerda DC-DC Boost Converter 12-14V to 15V 25A 450W internal power cable

SKU CH-CSN8-ATJFG

Boosts 12-14 V input to a steady 15 V output at up to 25 A and 450 W for internal power distribution

  • Boosts 12-14 V input to stable 15 V output
  • Delivers up to 450 W for demanding loads
  • Handles 25 A continuous current reliably
  • Operates from 9-14 V sources for flexible installs

12-14V to 15V Boost Converter

This DC-DC boost converter steps up an input voltage between 12 and 14 volts to a stable 15 volt output. It is rated for a continuous current of 25 amps and handles up to 450 watts of power. The unit is designed as an internal power cable for integration inside a chassis or vehicle. It suits builds that need a higher voltage rail from a standard 12 volt source.

Suits 25A 15V loads from 12V systems

Installers needing 15 volts at up to 25 amps from a 12 to 14 volt supply can use this module. It is not for systems requiring more than 450 watts or currents above 30 amps. Builds that must accept an input below 9 volts or above 14 volts should look elsewhere. Applications needing a different fixed output voltage or a buck topology are not supported.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $60.99
Pricier than about 86% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I wire the Vszerda DC-DC boost converter into a 12 V vehicle system and which connection is most often reversed?

Connect the 9-14 V source to the input terminals observing polarity; the step most installers get wrong is swapping the positive and negative leads, which prevents the unit from producing 15 V at up to 25 A.

What ongoing maintenance does the 450 W boost converter require and when should I plan to replace it?

No scheduled maintenance is needed; keep the converter’s ventilation clear and verify the input stays within 9-14 V, replacing the unit only if it no longer delivers a stable 15 V output under load.

More in Internal PSU & Riser Cables

Similar items