Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a DisplayPort output to HDMI for 4K at 60 Hz or 1080p at 120 Hz while supporting mirror and extend modes
The Vszerda DisplayPort male to HDMI female adapter converts a DisplayPort output to an HDMI input, supporting 4K UHD at 60 Hz and 1080p at 120 Hz with YCbCr 4:2:0 colour. It handles mirror and extend modes for multi-display setups and works with a long list of standard resolutions from 800 x 600 up to 4096 x 2160.
Use this adapter when a source device has only DisplayPort and the display or projector accepts only HDMI, avoiding a full cable replacement. The upgrade is worth it if you need 4K at 60 Hz or 1080p at 120 Hz; at 4K 30 Hz the adapter falls back to RGB or YCbCr 4:4:4 and 4:2:2, so higher refresh rates require the lower resolution.
Plug the DisplayPort male end into the source and connect an HDMI cable from the female port to the display; no drivers or external power are mentioned. Common issues include expecting 120 Hz above 1080p, which the adapter cannot deliver, or assuming 4K 60 Hz works with full RGB when the spec limits that mode to 30 Hz.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
It has a DisplayPort male connector on one end and an HDMI female port on the other, allowing you to plug a standard HDMI cable from your display into the adapter.
Connect the DisplayPort end to your source and an HDMI cable to the female port; then set the output to 1920 x 1080 at 120Hz with YCbCr420 colour format in your graphics control panel, as RGB or 444 modes are limited to 60Hz at that resolution.
No, the adapter is a passive hardware converter with a fixed list of supported timings including 3840 x 2160 at 60Hz and 1920 x 1080 at 120Hz; it does not receive firmware updates.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?