Vszerda PCIe 1x Extension Cable 5cm Silver-Plated 30AWG 90°

Compact PCIe 1x Riser for Tight Slots

This Vszerda extension cable adds 5 cm of reach to a PCIe 1x connection while keeping the profile low. A right-angle connector needs only 6 mm of vertical clearance, letting you install cards where a straight bracket would hit the case or another component. The silver-plated 30 AWG shielded wire is rated for full-speed, lossless signalling.

Verify Slot Space and Card Height

Measure the gap between your motherboard slot and the nearest obstruction; the 90-degree plug demands at least 6 mm of height above the board. Confirm the add-in card’s bracket will still align with the chassis cut-out once the riser is folded. The cable operates from -20 °C to 90 °C, so check that your enclosure airflow keeps temperatures inside that range.

Builders Fitting Expansion Cards in Cramped Chassis

Ideal for compact PCs, industrial appliances, or test benches where a full-length card cannot sit directly in the slot. The foldable 0.75 mm thick ribbon routes around tight corners without signal degradation. Not suited for builders who need longer reach than 5 cm, external cabling, or a vertical GPU mounting kit.