We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 5 cm PCIe 4.0 riser cable with dual 90-degree male-to-female 36-pin connectors

Vszerda

Vszerda PCIe 4.0 riser cable 5 cm 90-degree male-to-female 36-pin

SKU CH-V3ZE-GTT6G

PCIe 4.0 x1 riser cable with dual 90-degree connectors extends a slot by 1.97 inches using a flexible 36-pin design rated for 16 Gbps

  • Rated speed16000000000 bits per second
  • Connector count36
  • Connector detailsPcie X1
  • Connector genderMale-to-Female
  • Cable shieldingData Transfer
  • Product typePCIe
  • 16 Gbps PCIe 4.0 bandwidth for fast data transfer
  • Dual 90-degree connectors fit tight spaces easily
  • 36-pin full-function cable supports X1 through X16 devices
  • Pure copper tin-plated core ensures stable signal quality
  • TPE shielding with PE insulation blocks electromagnetic interference

Vszerda PCIe 4.0 Riser Cable 5 cm

This 5 cm PCIe 4.0 riser cable uses a 36-pin X1 male-to-female layout with dual 90-degree connectors. It suits builders who need to route an X1 card in tight spaces or connect open-ended devices such as 2.5G diskless boot cards, capture cards, SSD RAID cards or GPUs limited to X1 bandwidth. The 16 Gbps bandwidth handles high-frequency signals while remaining backward compatible with earlier PCIe generations.

Check your motherboard and card fit

Verify that your board has a free PCIe X1 slot and that the card you plan to install uses an open-ended X1 connector or larger open-ended variant. The 1.97-inch cable length and fixed 90-degree angles on both ends require enough clearance around the slot and the installed card. Ensure the chassis can accommodate the right-angle orientation without stressing the solder points secured by the reinforced bolts and nuts.

Thermals noise and power draw

The cable is a passive copper assembly with TPE shielding and PE insulation, so it adds no active cooling, fan noise or power draw to the system. Signal integrity relies on the pure copper tin-plated core and the shielding layer to resist electromagnetic interference during data transfer. Normal operation stays within the 16 Gbps specification without generating measurable heat beyond the host slot and connected device.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 68% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameXRIKUI
Product typePCIe
Performance
Rated speed16000000000 bits per second
Ports & slots
Connector count36
Connector detailsPcie X1
Connector genderMale-to-Female
Size & build
Cable shieldingData Transfer

Questions about this item

Does the 5 cm cable ship with any screws or mounting brackets, or must I supply my own?

The cable itself includes bolts and nuts on the PCB ends for reinforcement; no extra screws or brackets are mentioned, so plan to use your case or bracket hardware.

Should I pick the 5 cm length or a longer version for a GPU mounted vertically in a mid-tower case?

At 5 cm (1.97 inch) the cable only reaches devices positioned very close to the slot; choose a longer riser if the GPU sits farther away.

What real-world throughput can I expect from the 16 Gbps PCIe 4.0 x1 link when running a 2.5 GbE network card?

The x1 4.0 lane delivers up to 16 Gbps raw bandwidth, so a 2.5 GbE card will operate at its full line rate without bottleneck.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items