Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
PCIe 5.0 12+4-pin to triple 8-pin sleeved extension cable with combs for RTX 3090 Ti, 4080 and 4090, 30 cm long
This cable bridges a standard triple 8-pin PSU output to the 12+4-pin 12VHPWR connector found on RTX 3090 Ti and RTX 4080/4090 graphics cards. It is intended for builders upgrading a GPU without replacing the power supply. The 30 cm length suits typical mid-tower routing. The product ships new with three dedicated cable combs included.
Rated for over 600 W when all three 8-pin plugs are populated, the 16 AWG tinned-copper conductors stay cool under full load. Using fewer than three 8-pin sources reduces available power and stability. The extension design means it must attach to existing PSU cables; it does not connect directly to the PSU. A 35 mm straight run from the connector is advised before any bend.
Three 12+4-pin combs align the sleeved wires for a cleaner interior appearance. The combs slide along the cable but require gentle force to avoid damaging the thin sense wires inside the connector. Proper seating is critical: the plug must sit completely flush with the GPU socket, and the connection should be re-checked after routing to prevent accidental dislodgement.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Yes, the cable converts three 8-pin PCIe connectors into one 12+4 pin plug, so you can keep your current PSU cables and reach RTX 3090 Ti, 4080 or 4090 cards.
The connector should sit completely flush with the GPU socket with no visible gap; re-check after fitting the three supplied cable combs to ensure nothing has loosened.
The box contains one 30 cm 16-pin (12+4) to 3x8-pin sleeved extension and three dedicated 12+4 pin cable combs; no extra parts are required.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?