Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one 8-pin PCIe power connector into two 8-pin or 6-pin connectors for graphics cards
This Vszerda cable splits a single 8-pin PCIe power connector into two 6+2 pin male plugs. It lets a builder run two graphics cards or a card plus an accessory from one PSU lead. The 8-inch length gives enough reach for typical mid-tower layouts without excess slack.
The 12 V auxiliary outlet design maintains consistent voltage when both branches draw current during extended gaming or compute sessions. Metal conductors and the 6+2 pin configuration keep contact resistance low so neither connector overheats when the system runs at full throttle for hours.
A plastic-and-metal shell measures 12 by 10.3 by 14 centimeters and fits tight spaces behind a motherboard tray. The colour-coded yellow wiring helps identify the 12 V rail at a glance while the splitter reduces mechanical strain on the graphics card power socket during installation and transport.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | axGear |
| Model name | 8P-8PX2 |
| Product type | 12v Auxiliary Power Outlet |
| Product color | Black |
| Ports & slots | |
| First connector | 12v Auxiliary Power Outlet |
| Connector count | 12v Auxiliary Power Outlet |
| Connector details | 12v Auxiliary Power Outlet |
| Size & build | |
| Overall length | 2 L x 10.3 W x 14 H centimeters |
| Cable length | 5, inches |
| Conductor type | Metal |
| Build details | Metal |
The splitter uses metal conductors and plastic insulation rated for 12 V auxiliary power; it adds no active components, so heat and draw stay the same as the original 8-pin feed.
Your PSU needs one free 8-pin PCIe output; the splitter converts that single connector into two 8-pin (6+2) male plugs for the graphics card.
At roughly 8 inches the cable bridges typical PSU-to-GPU distances in full-tower builds, and the flexible jacket reduces strain on the card’s power socket.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?