Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects OCuLink SFF-8611 devices at PCIe 4.0 64Gbps with a 90° angled 50cm active cable for tight spaces
The Vszerda SF-014-LE-HX is a 50cm active cable with SFF-8611 4i male connectors on both ends. Its 90-degree angled plugs let you route PCIe 4.0 signals into backplanes or controllers where straight headers cannot fit. Builders adding external GPUs or high-speed SSDs inside cramped chassis will appreciate the space-saving profile.
The single specification that determines compatibility is the 64 Gbps data rate carried over the OCuLink protocol. Your host and target devices must each present a free SFF-8611 4i port running PCIe 4.0; older 3.0 links will negotiate down, while 5.0 hardware is not supported by this cable.
Active signal conditioning inside the connector heads maintains the 64 Gbps link without external power, so the cable adds no heat or fan noise to the system. Power draw is limited to the PCIe specification for the interface, and the black jacket shields the differential pairs during normal operation.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | SF-014-LE-HX |
| Product color | Black |
It carries PCIe 4.0 signals at full x4 speed, so a compatible SSD or eGPU enclosure can reach the bus maximum of 64 Gbps without the cable becoming the bottleneck.
The connector follows the OCuLink SFF-8611 specification and caps the link to a PCIe 4.0 x4 lane width, so bandwidth stops at 64 Gbps even if the host supports more lanes.
The right-angle hood lets the cable sit flush against the board, needing only the depth of the connector body plus a few millimetres for the latch — ideal for tight 14 mm gaps between cards.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?