Vszerda USB 2.0 9-pin to Type-E internal adapter
Converts a motherboard USB 2.0 9-pin header to a USB 3.2 Type-E front-panel port, limited to USB 2.0 speeds
- Converts a 2.0 9-pin header to a Type-E 20-pin front-panel port
- Driver-free installation works on any Windows or Linux system with a 9-pin socket
- PCB edge uses rounded corners to protect fingers during handling
- Differential-signal design keeps the link stable and noise-resistant
- Maximum throughput capped at 5 Gbps because the 9-pin source is USB 2.0
Front-panel USB 2.0 to Type-E adapter
This Vszerda adapter converts a motherboard USB 2.0 9-pin header into a vertical USB 3.2 Type-E connector. It mounts on a PCI bracket so a front-panel USB-C cable can reach the internal header. The link runs at USB 2.0 speeds because the source header is 9-pin. No driver installation is required on Windows or Linux.
Check header type and case cable
Verify the motherboard has a standard USB 2.0 9-pin front-panel header. Confirm the chassis includes a front-panel cable terminated with a USB 3.2 Type-E 20-pin plug. The adapter measures 3 by 1.65 by 0.63 centimetres with rounded PCB edges. Ensure bracket clearance inside the case before ordering.
Replaces makeshift header wiring
The adapter replaces improvised wiring or missing front-panel USB-C connectivity on boards that only expose USB 2.0 headers. The upgrade is worthwhile when the case provides a Type-E front port but the motherboard lacks a native Type-E header. Speed remains limited to USB 2.0 5 Gbps maximum regardless of the Type-E connector.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Questions about this item
Does the package include a USB Type-E cable or must I buy one separately?
The package contains only the 9-pin to Type-E adapter board; a Type-E cable from the case front panel is required and is not included.
Which header version should I choose if my motherboard has a USB 2.0 9-pin header?
This adapter is built for a USB 2.0 9-pin header and converts it to a Type-E 20-pin connector; no other version is offered.
What real-world speed will I see when the adapter is connected to a USB 2.0 9-pin header?
The link is limited to USB 2.0 signalling, so the maximum throughput is 5 Gbps even though the Type-E connector supports USB 3.2.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek USB4 usb cable 3.3Ft 40Gbps 240W 8K@60Hz
- USB C to USB C
- USB4





