We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular KVM switch with front panel buttons and rear DisplayPort and USB ports

Vszerda

Vszerda USB 3.0 DisplayPort 1.2 Dual Monitor KVM Switch 4 Computers 2 Monitors

SKU CH-AMX0-4M6S5

Connects four computers to two monitors with keyboard, mouse, audio and two USB 3.0 peripherals, switching at up to 4096x2160@60Hz 4:4:4 via DisplayPort 1.2

  • Share 4 computers across 2 monitors with USB 3.0 peripherals and audio
  • Switch between extended, mirror or video-wall display modes
  • Supports keyboards, mice, touch screens and gaming peripherals
  • 4096×2160 at 60 Hz 4:4:4 with EDID emulation
  • Front USB 3.0 hub plus wired remote for instant switching

Dual-Monitor KVM for Four Computers

This DisplayPort 1.2 KVM switch lets four computers share one keyboard, one mouse, two monitors, two USB 3.0 peripherals and audio. Each computer requires two DisplayPort outputs and the switch provides two DisplayPort outputs for the monitors. It is built for users who need to control multiple systems from a single desk setup.

4096×2160@60Hz Resolution with EDID Emulation

The switch supports resolutions up to 4096x2160 at 60 Hz with 4:4:4 colour sampling and handles lower resolutions automatically. EDID emulation keeps display information stable when switching, so monitors retain their native settings. Bandwidth runs out above that resolution and refresh rate, so higher-spec panels will not reach their maximum potential.

Five Switching Methods and Included Cabling

Front-panel buttons, a wired remote push-button, keyboard hotkeys, mouse gestures and IR control give five ways to change the active computer. The package supplies four DisplayPort cables, two USB 3.0 cables, a 5 V 2 A power adapter and a manual. No extra cables are required for a basic four-computer, dual-monitor installation.

How it compares

Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.

Price $365.99
Pricier than about 88% of the 4,010 comparable items (median $105.49).

Specifications

No published specifications for this item yet.

Questions about this item

Can I connect two older monitors that only support 1080p to the dual DisplayPort 1.2 outputs without losing the EDID emulation?

Yes, the switch supports resolutions up to 4096x2160@60Hz 4:4:4 and is compatible with lower resolutions while EDID emulation maintains correct display information for each monitor.

How can I verify the KVM is passing HDR10 and 4:4:4 colour correctly after I finish the installation steps?

Check your operating system display settings to confirm the output shows 4096x2160@60Hz with 4:4:4 chroma and HDR enabled; the EDID emulation keeps the monitors identified correctly during switching.

Which cables are included for the four computer connections and what must I provide myself?

The box includes four DisplayPort cables and two USB 3.0 cables for two computers; you will need to supply two additional USB 3.0 cables for the remaining computers and any audio or remote cables you wish to use.

More in KVM Switches & Rack Consoles

Similar items