Vszerda USB 3.0 Type-A to Micro SATA 7+9 16Pin 1.8" SSD Adapter Cable 90° Angled 10cm
Connects a 1.8" Micro SATA SSD to a USB 3.0 port with a 90° angled 10cm cable for 5Gbps data transfer and plug-and-play use
- Product typeUSB
- Product colorBlack
- Key featuresAngled Connector
- Connect 1.8″ Micro SATA SSDs via USB 3.0 Type-A
- 5 Gbps peak transfer rate for fast data access
- 90° angled connector eases tight installations
- Hot-swap and plug-and-play support across Windows, Linux, macOS
- Bus-powered design removes need for external power supply
Purpose and audience
This adapter cable lets you connect a 1.8 inch Micro SATA SSD or hard drive to a USB Type-A port on a laptop or desktop. It is aimed at technicians and hobbyists who need to recover data, clone drives or test bare 1.8 inch drives without installing them inside a chassis.
Build and daily use
The 10 cm cable has a 90 degree angled Micro SATA connector that reduces strain in tight drive bays or on crowded benches. A black PVC jacket protects the conductors and the bus-powered design means no separate power brick is needed for 1.8 inch drives that draw within the USB port’s current limit.
Check before you buy
Verify that your drive uses the 7+9 16 pin Micro SATA interface because standard 2.5 inch SATA or mSATA drives will not fit. Confirm the host system has a USB 3.0 Type-A port for full 5 Gbps speed; the cable will fall back to USB 2.0 or 1.1 speeds on older ports.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | NGFF |
| Product type | USB |
| Product color | Black |
Questions about this item
What is the maximum throughput of the USB 3.0 interface on this adapter?
The USB 3.0 interface reaches 5 Gbps super speed, while the SATA side supports Gen1 at 1.5 Gbps, Gen2 at 3.0 Gbps and Gen3 at 6 Gbps for 150, 300 and 600 MB/s respectively.
Which drive form factor and connector does this 16-pin cable accept?
It fits a 1.8 inch Micro SATA SSD with a 7+9 16-pin connector and a 90 degree angled plug.
How do I connect the adapter and what common step should I avoid?
Plug the USB Type-A end into the host, attach the angled Micro SATA connector to the 1.8 inch drive, and do not look for an external power supply because the adapter is bus powered.
More in USB Cords & Extension Cables
Similar items
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4





