Wiegmann N1C121606 line protection 12x16x6 in 14 ga

Industrial Enclosure N1C121606

This carbon-steel enclosure carries a NEMA 1 rating and measures 16 inches high by 12 inches wide by 6 inches deep. It is built for indoor line-protection duties such as housing bus plugs or similar electrical components. The 14-gauge construction and ANSI 61 gray powder coat give it a durable finish for commercial and light-industrial settings. Wall-mount tabs are integrated for straightforward installation.

Thermal And Power Characteristics

Passive heat dissipation is provided by the steel body and the 5.88-inch usable opening depth, so no fans or active cooling are required. The solid cover with 1/4-turn latch seals the interior without restricting airflow through the enclosure walls. Power draw is determined entirely by the devices mounted inside rather than by the enclosure itself. The cULus and UL listings confirm compliance with standard safety requirements for this class of equipment.

Sustained Load Behaviour

Under continuous operation the enclosure temperature will track the ambient environment plus the heat generated by the installed components. The 14-gauge steel and powder-coated finish maintain structural integrity and corrosion resistance over long service periods. The hinged cover and flush-mounted latch allow repeated access for inspection or rework without degrading the seal. No internal panel is included, so installers must provide their own mounting hardware for the protected devices.