WRIARICH 3.5mm TRS Female to 3 Screw Terminal Adapter 2-Pack

Solderless 3.5 mm TRS adapter 2-pack

This two-pack provides a 3.5 mm three-pole female jack on one side and a three-screw terminal block on the other. It lets technicians and hobbyists connect bare wires to a standard stereo plug without any soldering. The gold-plated contacts are intended for maximum signal transfer and durability. Each adapter weighs 0.01 kilograms.

Tool-free wiring for custom audio jigs

The screw terminals accept stranded or solid-core wire secured with a small screwdriver, freeing you from a soldering iron and heat-shrink tubing. You can build or repair headphone cables, AV test leads or smartphone audio interfaces directly on the bench. Because the connectors are female on both ends, they sit inline between a 3.5 mm plug and your open wires.

Handles stereo signals up to the terminal limit

The three-pole TRS layout carries left, right and ground for balanced stereo audio, matching the 3.5 mm jacks found on most smartphones and portable gear. It stops at three conductors, so four-pole TRRS headsets with a microphone contact cannot be fully wired. The screw terminals set the practical wire-gauge ceiling for the build.