WRIARICH 3-Port HDMI Switch 8K@60Hz 4K@120Hz 48Gbps Remote
A 3-port HDMI 2.1 switch routes 8K at 60 Hz or 4K at 120 Hz with 48 Gbps bandwidth and includes an IR remote effective to 15 ft
- Port count3
- Adapter typeHDMI Switch/Extender
- Product typeHDMI Switchers
- Product colorBlack
- Switch three sources with one remote from 15 ft away
- Enjoy 4K gaming at 120 Hz with HDR detail
- Supports 8K resolution at 60 Hz for future-proof viewing
- 48 Gbps bandwidth carries uncompressed audio and video
- Manual button on the unit gives instant local control
3-Port 8K HDMI Switch for Multi-Source Setups
This new WRIARICH HDMI switch connects three source devices to one display. It supports 8K resolution at 60 Hz and 4K at 120 Hz for gaming consoles, streaming sticks, Blu-ray players and computers. The unit includes an IR remote and a manual button for input selection.
Sustained 48 Gbps Bandwidth With IR Control
The switch maintains a full 48 Gbps data rate for continuous high-bitrate video and audio streams. Switching between inputs takes roughly one to two seconds. The IR remote works reliably up to 15 ft, allowing comfortable control from a sofa or bed without line-of-sight constraints.
Verify HDMI 2.1 Cables and Device Compatibility
Before ordering, confirm that every source, the display and all cables support the HDMI 2.1 specification. The manufacturer notes that a 3.3 ft cable for inputs and a 5 ft cable for the output give the best results. Devices limited to older HDMI versions will not pass 8K or 4K 120 Hz signals.
How it compares
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 67% of the 1,998 comparable items (median $27.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | HDMI Switchers |
| Adapter type | HDMI Switch/Extender |
| Product color | Black |
| Ports & slots | |
| Port count | 3 |
Questions about this item
Does the switch generate noticeable heat or noise when left on all day?
The unit is a passive HDMI 2.1 switch with no fan, so it runs silently and produces minimal heat during continuous use.
What cables and source devices must I already have for the 48 Gbps link to work?
You need HDMI 2.1 cables — ideally 3.3 ft for each input and 5 ft for the output — plus source devices and a display that all support HDMI 2.1 and the desired 8K@60 Hz or 4K@120 Hz modes.
Will my older 4K@60 Hz monitor and legacy consoles work through this switch without downscaling the newer gear?
Yes, the switch passes each signal natively; a 4K@60 Hz screen or older console will operate at its own maximum rate while newer 8K or 4K@120 Hz sources run at full speed on the same 48 Gbps pathway.
More in HDMI & AV Selector Switches
Similar items
LUOM OZJ3 2x2 HDMI Matrix 4K@60Hz video switch
- HDMI Switch/Extender
- HDMI Switchers
Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
Jansicotek OZJ3 2x2 HDMI Matrix Switch audio
- HDMI Switch/Extender
- HDMI Switchers
Jansicotek OZJ3 2×2 HDMI Matrix Switch 4K@60Hz 18.5Gbps
- HDMI Switch/Extender
- HDMI Switchers





