Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 10 ft DisplayPort 1.4 cable delivering 32.4 Gbps for 8K at 60 Hz or 4K at 144 Hz with gold-plated connectors and triple shielding
This DisplayPort 1.4 cable links a graphics card or laptop to a monitor or projector with a matching DisplayPort input. It suits gamers, content creators and office users who need 8K 60 Hz or 4K 144 Hz over a 10 ft run.
The cable carries up to 32.4 Gbps using HBR3 signalling and DSC 1.2 compression. That ceiling decides whether your target resolution and refresh rate are possible; anything above it will not work.
Male-to-male connectors plug directly into source and display without adapters. The hybrid glass-fibre and copper construction keeps the signal stable at 10 ft, freeing you from shorter copper-only cables that would force the PC closer to the screen.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | WRIARICH |
| Model name | DP28 |
| Product color | Black |
| Performance | |
| Rated speed | Supports up to 32.4 Gbit/s bandwidth. |
| Display | |
| Refresh frequency | Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.) |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort 1.4 |
| Destination connector | 1 x DisplayPort 1.4 |
| Connector details | DisplayPort to DisplayPort( Male to Male) |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 10 ft (3.05 m) |
| Cable length | 10 ft (3.05 m) |
| Conductor type | Triple-shielded |
| Compatibility | |
| Supported platforms | Certified for Windows Vista |
The cable is built to the DisplayPort 1.4 HBR3 specification and supports the full 32.4 Gbps link rate required for 8K at 60 Hz with DSC 1.2 compression, provided your GPU and monitor both implement that mode.
DisplayPort 1.4 caps the raw link at 32.4 Gbps, so the highest uncompressed timing is 4K at 144 Hz; 8K at 60 Hz and 2K at 240 Hz are achieved by using DSC 1.2 compression within the same bandwidth ceiling.
Each end uses a standard DisplayPort male plug with a latch; allow roughly 40 mm of straight-back depth from the panel surface for the connector body and cable bend radius.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?