VCE SJ661-100P-CA Cat6 RJ45 Pass Through Connectors 100-Pack
- Ethernet, Male
- Unshielded, Male
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A USB-powered RJ45 splitter expands one Ethernet port into four gigabit connections for Cat5 to Cat8 cables
The WRIARICH OZHW5 is a powered Ethernet splitter that turns one RJ45 port into four Gigabit connections. It includes an 80 cm USB cable for power and supports Cat5 through Cat8 cables. The compact adapter measures 4.02 by 3.74 by 1.06 inches and weighs 3.2 ounces.
This splitter suits homes or offices where cabling is limited and four devices must share one incoming line. It requires a constant USB power source, so setups without a nearby USB port or power socket should look at an unpowered alternative or a mains-powered switch.
The single specification that decides fit is the 1000 Mbps aggregate bandwidth shared across the four ports. If your workflow needs dedicated Gigabit to each device simultaneously, this splitter cannot deliver that; a managed switch with independent ports is the correct choice.
Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | WRIARICH |
| Model name | OZHW5 |
| Product type | Ethernet Splitter 1 to 4 RJ45 Network Adapter |
| Adapter type | Gigabit RJ45 Ethernet Splitter 1 to 4 |
| Ports & slots | |
| Connector type | RJ45 |
| Size & build | |
| Product dimensions | 4.02 × 3.74 × 1.06 in |
| Product weight | 3.2 oz |
| In the box | |
| In the box | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
Connect the single RJ45 input to your router or switch, plug the four output cables into your devices, then attach the included 80 cm USB power cable to a 5 V USB port — the splitter will not work without this power connection.
No routine maintenance is required; if the USB power cable or any RJ45 port becomes damaged, replace the entire splitter unit.
The four ports share a single 1000 Mbps uplink, so total throughput across all connected devices cannot exceed 1000 Mbps.
More in Network Adapters & RJ45 Plugs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?