We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red right-angle 12VHPWR GPU power adapter with aluminum casing

WRIARICH

WRIARICH PCIe 5.1 12VHPWR 600W 180° Right Angle Adapter Red

SKU CH-DJBZ-H2PST

A 180-degree right-angle adapter converts a 12+4 pin cable to a 16-pin 12VHPWR GPU connector for up to 600W

  • Connector detailsDVI to DVI
  • Connector genderFemale to Female
  • Product typeSpeaker Wires
  • Details12VHPWR GPU Power Connector, EZDIY-FAB, EZDPI189-36, RTX 309
  • Key features12VHPWR GPU Power Connector, RTX 3090Ti, 4070Ti, 4080, 4090
  • 180° right angle prevents cable strain for clean GPU installs
  • 12V-2x6 connector delivers up to 600W power to RTX 4090 cards
  • 4-layer PCB with 2oz copper handles peak loads without overheating
  • Aluminium mech-armour shell adds thermal venting for cooler operation
  • Red finish matches custom builds while keeping a slim 10.4902 cm profile

600 W 12VHPWR Right-Angle Adapter

This 180-degree right-angle adapter converts a standard PCIe 5.1 12+4-pin cable into a 16-pin 12VHPWR connector rated for 600 W. It is built for owners of RTX 3090 Ti, 4070 Ti, 4080 and 4090 graphics cards who need a clean cable run in tight chassis spaces. The red aluminium housing adds a visual accent while the 4-layer PCB handles sustained high current.

Replaces Sharp Cable Bends Near the GPU

The adapter eliminates the tight bending radius that occurs when a straight 12VHPWR plug exits the card directly against a side panel or bulky cooler. The jump is worth it when cable clearance is below the connector height or when repeated thermal cycling has stressed a factory cable. It is not for builders using the MSI GeForce RTX 4090 Suprim Liquid X 24G or the RTX 5090 due to physical interference and extreme power spikes.

Verify GPU Connector Orientation and Case Clearance

Confirm that your graphics card uses a standard 12+4-pin 12VHPWR socket oriented so the 180-degree bend routes the cable toward open space rather than the motherboard or panel. Measure the gap between the connector face and the nearest obstruction to ensure the adapter’s low-profile shell fits without pressure. A 100% secure, gap-free seat is required for safe operation.

How it compares

Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.

Price $30.99
Pricier than about 90% of the 433 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameCable Matters
Model nameEZDPI189-36
Product typeSpeaker Wires
Ports & slots
Connector detailsDVI to DVI
Connector genderFemale to Female

Questions about this item

How much clearance does the 180° right-angle 12VHPWR adapter need behind the graphics card?

The adapter measures 3.4036 cm in length, 6.096 cm in width and 10.4902 cm in height, so allow at least that much space behind the 16-pin port for the right-angle bend.

What is the correct way to seat the 12V-2x6 connector so the 600 W rating is safe?

Push the 12+4 pin plug straight into the GPU until the latch clicks with zero gap; the reinforced 4-layer PCB and 2 oz copper rely on full terminal contact to handle 600 W without overheating.

When should the aluminium-shielded adapter be replaced to avoid thermal issues?

Replace it if the mech-armour casing shows deformation, the venting channels are blocked by dust, or the connector pins display any discolouration from repeated high-current cycles.

More in Y-Splitter Power Cables

Similar items