XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 TB M.2 2280 solid-state drive with a built-in RGB heatsink, PCIe Gen4 x4 interface and NVMe 1.4 protocol, reaching sequential reads up to 6000 MBps and writes up to 4000 MBps.
The XPG SPECTRIX S65G is a 1TB M.2 2280 internal SSD built for consumer desktops and laptops. It uses a PCIe Gen4 x4 interface with NVMe 1.4 protocol to deliver high throughput for gaming and content workloads.
An integrated RGB heatsink manages thermals during sustained transfers while adding addressable lighting to a build. The M.2 2280 form factor fits standard motherboard slots and the drive is validated for PS5 expansion storage.
Sequential reads up to 6000 MBps and writes up to 4000 MBps reduce level load times compared to lower-tier NVMe SSDs. A 320TB TBW rating and 2,000,000 hour MTBF support heavy write workloads over a long service life.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | XPG |
| Product line | SPECTRIX S65G |
| Model name | SPECTRIX S65G |
| Total capacity | 1 TB |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 6,000 MB/s |
| Sequential write speed | Up to 4,000 MB/s |
| Storage | |
| NAND flash type | 3D NAND |
| Write endurance | 320 TB |
| Connectivity | |
| Connection protocol | NVMe 1.4 |
| Ports & slots | |
| Interface type | PCIe Gen4 x4 |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | With RGB HeatSink |
| Shipping weight | 0.05 kg |
| Package size | 131 × 103 × 17 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 2,000,000 h |
The drive is rated for up to 6000 MBps sequential read and 4000 MBps sequential write over the PCIe Gen4 x4 link, with NVMe 1.4 protocol.
The M.2 2280 board with integrated RGB heatsink matches the standard 22 mm width and 80 mm length; verify your motherboard or PS5 clearance for the added heatsink height.
Insert the M.2 2280 module at an angle into the keyed slot, press down, and secure with the retention screw; the step often missed is enabling the PCIe Gen4 x4 mode in BIOS for full 6000 MBps performance.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?