Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Sleeved 18AWG tinned-copper cable connects a Corsair HX Type 4 PSU to two GPU 6+2-pin sockets over 60 cm plus a 20 cm branch
This YEPLOOK modular cable connects Corsair HX750, HX850, HX1000 and HX1200 Type 4 power supplies to graphics cards. It carries a PSU-side 8-pin plug that splits into two PCIe 6+2-pin connectors, each sliding to fit 6-pin or 8-pin sockets. The 18AWG tinned copper conductors are wrapped in a black nylon braided net for flexibility and corrosion resistance.
The cable is made for owners of the listed Corsair HX Platinum models who need a replacement or spare GPU power lead. It will not work with other Corsair series, other brands or non-modular units, and mixing it with unrelated modular cables can cause damage. Buyers without a compatible HX Type 4 PSU should look elsewhere.
The total run measures approximately 60 cm from the PSU to the first connector plus 20 cm to the second, giving enough reach for most dual-connector cards while keeping slack manageable. The pin layout includes an empty position on the PSU 8-pin plug, which is a normal design feature and not a defect.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | YEPLOOK |
| Product type | Modular power cable |
| Product color | Black |
| Ports & slots | |
| First connector | 2x PCIe 6+2pin male |
| Second connector | PSU 8Pin |
| Connector count | 3 |
| Connector details | PCIe 8pin |
| Connector gender | Male to Male |
Plug the single PSU 8Pin end into the Type 4 modular port matching its pin layout; the empty pin is normal. Then connect each 6+2Pin to the GPU, sliding the 2Pin section on for 8Pin or off for 6Pin.
The tinned copper conductors resist corrosion, so no periodic maintenance is required. Replace only if the nylon braid frays, connectors loosen, or you move to a non-Type 4 PSU where the pinout differs.
The 18AWG wires are rated for 300V and 800W maximum GPU draw; sustained loads above 800W will hit the cable's power limit before the 80°C temperature rating becomes a factor.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?