Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects Corsair Type 4 SF450, SF600 or SF700 PSUs to graphics cards with an 8‑pin or 6+2‑pin PCIe socket, using 18AWG tinned copper wire in a 60cm nylon‑braided sleeve
This YEPLOOK PCIe power cable connects a Corsair Type 4 SF450, SF600 or SF750 modular power supply to a graphics card with an 8-pin, 6-pin or 8+6-pin socket. The 18AWG tinned copper conductors are sleeved in a nylon braided net for flexibility and durability. It is supplied as a single 60cm cable with a PSU 8-pin connector on one end and a 6+2-pin PCIe connector on the other. The pin layout includes an empty position on the PSU side, which is the standard design for this series.
The cable is wired exclusively for Corsair Type 4 SF series units and will not work with SF850 or SF1000 Type 5 models, nor with Corsair Type 1, Type 2 or any other brand. Using it on an incompatible PSU can cause damage, so builders who own a different power supply must source the correct cable for that unit.
The cable is rated to support up to 800W, which determines whether it can safely deliver the power your graphics card requires. Check the card's power specification against this limit before installation.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | YEPLOOK |
| Product color | Black |
| Size & build | |
| Cable length | 1.96 ft (0.6m) |
Connect the PSU 8‑pin end to the Type 4 modular port on the SF600, then attach the 6+2‑pin end to the GPU; the step often missed is verifying the empty pin on the PSU connector matches the factory pinout before powering on.
Inspect the nylon braid and tin‑coated copper for abrasion or heat discoloration after heavy GPU loads; replace the cable if the braid frays or the connectors become loose, as no user‑serviceable parts exist inside.
The 18AWG conductors reach their thermal ceiling first, so continuous draws near the 800 W rating will cause the cable to heat up before any voltage‑drop issue arises.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?