We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

YEPLOOK

YEPLOOK PCIe Dual 8-Pin 6+2Pin Sleeved 60+20CM GPU Power Cable for Corsair AX-i Series

SKU CH-7KHD-MX3ZH

A sleeved 18 AWG GPU power cable with a PSU 8-pin connector splitting to two PCIe 6+2-pin plugs, 60 cm plus 20 cm long, for Corsair AX-i modular supplies

  • First connector2x PCIe 6+2pin male
  • Second connectorPSU 8Pin
  • Connector count3
  • Connector detailsPCIe 8pin
  • Connector genderMale to Male
  • Product typeModular power cable
  • Tinned copper resists corrosion for longer cable life
  • Flat braided nylon sleeve enables tight folds and neat routing
  • Dual 6+2 pin PCIe connectors fit 6-pin, 8-pin or 6+8-pin GPU sockets
  • 60 cm main plus 20 cm branch reaches distant graphics cards cleanly
  • 18 AWG UL1007 wires rated 300 V from -30 °C to 80 °C

Corsair AX-i dedicated GPU cable

This sleeved assembly connects a Corsair AX-i series modular power supply to a graphics card using one PSU-side 8-pin and two PCIe 6+2-pin connectors. The flat nylon-braided construction uses 18 AWG tinned copper conductors rated for 300 V and an operating range of -30 °C to 80 °C. It is a new replacement part designed exclusively for AX1600i, AX1500i, AX1200i, AX860i and AX760i units.

Builders with AX-i PSUs needing dual GPU plugs

The cable suits anyone upgrading or re-routing power on the listed Corsair models where the pin layout matches the empty-pin PSU connector shown in the documentation. It will not work with power supplies from other brands or non-AX-i Corsair lines, and mixing it with unrelated modular cables can cause damage. Buyers who need a different PSU-side pinout or a single PCIe connector should look elsewhere.

60 cm plus 20 cm split length decides routing

The total run measures 60 cm from the PSU to the first branch point, then 20 cm to each PCIe plug, giving a fixed geometry for cable management. Thirty-four internal wires inside the UL1007 sheath carry the load, and the 6+2-pin ends slide to fit 6-pin, 8-pin or 6+8-pin card sockets. If your case layout demands a different overall reach or branch spacing, this cable will not match.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 70% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameYEPLOOK
Product typeModular power cable
Product colorBlack
Ports & slots
First connector2x PCIe 6+2pin male
Second connectorPSU 8Pin
Connector count3
Connector detailsPCIe 8pin
Connector genderMale to Male

Questions about this item

Is the 60 cm + 20 cm dual-head length suitable for a full-tower build with the GPU mounted vertically?

The cable provides a 60 cm main run plus a 20 cm branch to the second PCIe 6+2 pin, giving enough reach for most full-tower layouts including vertical GPU mounts.

What does the 800 W headline figure mean once the cable is installed in a real system?

The 18 AWG tinned copper conductors are rated for up to 800 W total across both PCIe 6+2 pin plugs, covering cards such as the GeForce 3080 or 6800 XT.

The PSU end uses an 8-pin connector — what standard does it follow and what does that cap in practice?

The PSU-side 8-pin follows the Corsair AX-i series pinout; the empty pin is by design. It caps use to AX1600i, AX1500i, AX1200i, AX860i and AX760i units only.

More in Internal PSU & Riser Cables

Similar items