TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one 4K 30 Hz HDMI source across six 1080p 60 Hz displays in a 2×3 video wall with audio extraction and plug-and-play operation
This unit takes one HDMI source and splits it across six displays in a 2×3 grid. It is aimed at installers building advertising walls, restaurant menus or classroom displays. No control software is required; the hardware handles the stitching automatically.
Connect the source to the single HDMI input and run six HDMI cables to the screens. The main limitation is cable length: 4K at 30 Hz needs an 8 m AWG26 cable, while 4K at 60 Hz requires a 3 m HDMI 2.0 cable. Exceeding those distances will drop the signal.
Although the input accepts up to 3840×2160 at 30 Hz, each of the six outputs is limited to 1920×1080 at 60 Hz. Audio can be extracted via optical or 3.5 mm analogue ports. Cascading multiple units is possible, but total display count and bandwidth stay bound by the same output ceiling.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | HDMI |
Verify each of the six HDMI outputs shows a 1920x1080/60Hz signal and that the stitched image spans all screens without gaps; the front panel LEDs indicate active ports and the audio extraction ports pass DTS-HD or PCM sound.
The unit includes the controller and a UK power plug; you must supply one HDMI source cable up to 8 m for 4K/30Hz or 3 m for 4K/60Hz, plus six HDMI display cables and any optical or 3.5 mm audio leads you need.
Select the built-in 2x3 mode for a six-screen wall; use the cascade function to link additional controllers when expanding beyond six displays, all configured via the hardware buttons with no software required.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?