We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
YINGHUA Mini SAS cable for PowerEdge R620

YINGHUA

YINGHUA Mini SAS Cable for PowerEdge R620 0HHYJ 00HHYJ

SKU CH-TACK-DVYKY

Connects a Mini PERC X8 controller to SAS drives in a PowerEdge R620 server

  • Mini SAS cable connects storage controllers in PowerEdge R620 servers
  • Direct fit for Mini PERC X8 part numbers 0HHYJ and 00HHYJ
  • New condition ensures reliable signal integrity for SAS links
  • Purpose-built cable simplifies internal drive array cabling

Mini SAS cable for PowerEdge R620

This new Mini SAS cable connects the Mini PERC controller inside a Dell PowerEdge R620 server. It carries SAS signals between the RAID card and the backplane so the storage array can be recognised by the system. The part matches Dell part numbers 0HHYJ and 00HHYJ.

Replaces a damaged or missing Mini SAS link

Install this cable when the original Mini SAS connection has failed or was removed during a chassis swap. The upgrade is worth it only if the server uses a Mini PERC X8 controller and the backplane expects the same pin-out; builders who need a different controller interface or a longer cable run cannot use this part.

How it compares

Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.

Price $77.99
Cheaper than about 78% of the 3,798 comparable items (median $131.99).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What server chassis does the YINGHUA Mini SAS cable fit inside?

The cable is designed for the PowerEdge R620 chassis and connects to the Mini PERC X8 controller using part numbers 0HHYJ and 00HHYJ.

Which connector orientation avoids a bent pin when seating the Mini SAS plug into the PERC X8 card?

Align the keyed notch on the Mini SAS connector with the slot on the Mini PERC X8 port, then press straight in until the latch clicks.

More in Server & Hot-Plug PSUs

Similar items