We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metallic open angular contact ball bearing 95x170x32mm

ZIBOO

ZIBOO NTN 7219B Single Angular Contact Ball Bearings Open Type 95x170x32mm

SKU CH-A6CD-H221M

Single-row angular contact ball bearing with 95 mm bore, 170 mm outer diameter and 32 mm width for combined radial and axial loads

  • Precision angular contact design handles combined radial and axial loads
  • Open-type construction allows easy lubrication access and inspection
  • 95 mm bore fits standard 95 mm shaft diameters
  • 170 mm outer diameter matches common housing specifications

NTN 7219B Angular Contact Bearing

The NTN 7219B is a single-row angular contact ball bearing supplied in an open configuration. It measures 95 millimetres bore by 170 millimetres outside diameter and 32 millimetres width. The bearing is manufactured by NTN and distributed under the ZIBOO brand for trade and maintenance use.

Suits radial-axial combined loads

This bearing suits applications that carry combined radial and axial loads in one direction where an open design allows relubrication. It is not for situations requiring integral seals or shields, for fully axial thrust-only loading, or for misalignment compensation beyond the limited capacity of a single-row angular contact design.

How it compares

Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.

Price $84.99
Cheaper than about 57% of the 5,006 comparable items (median $95.99).

Specifications

Product
Brand nameZIBOO
Model nameNTN 7219B

Questions about this item

What shaft diameter does the 95 mm bore of the NTN 7219B bearing require?

The bearing has a 95 mm bore, so the shaft must be machined to a 95 mm diameter with the appropriate tolerance for a press or slip fit.

Can the 170 mm outside diameter of this bearing fit inside my existing housing?

The bearing’s outside diameter is 170 mm; your housing bore must be at least 170 mm with the correct tolerance to accept it.

More in Electrical Trade Tools & Kits

Similar items