Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a 4-pin CPU power connector to an 8-pin (4+4) motherboard socket using 8-inch, 18AWG tin-plated copper wire with PVC insulation and a mesh sleeve
This 4-pin to 8-pin CPU power adapter extends an existing 4-pin connector and converts it to an 8-pin (4+4) plug for motherboards that require the larger socket. It is suited for builders reusing older power supplies with modern boards that only offer an 8-pin CPU power header.
The cable uses 18AWG tin-plated copper conductors with a 1.02 mm diameter and 0.81 mm² cross-section, rated for 300 V and 80 °C under the UL 1007 standard. At 8 inches long, it provides enough reach for typical ATX layouts while the double-shielded, PVC-insulated wire and mesh sleeve keep routing tidy and resist corrosion.
The adapter relies on the original 4-pin source, so total CPU power delivery cannot exceed what that single 12 V rail supplies; boards drawing sustained current beyond the 4-pin specification may become unstable. The safety-lock connectors prevent accidental disconnection, but the 20 cm length offers no slack for full-tower rerouting or rear-cable-management channels.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ZLKSKER |
| Model name | 4p-8p |
| Product type | Cable Connectors |
| Product color | Black & Yellow |
| Performance | |
| Rated speed | Test |
| Display | |
| Refresh frequency | 8 in (20.3 cm) |
| Ports & slots | |
| First connector | Plug and Play |
| Second connector | Plug and Play |
| Connector details | DB9 to DB9 |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | Inches 8 |
| Cable length | 8 in (20.3 cm) |
| Cable shielding | Double-shielded |
| More details | |
| Team affiliation | 1 Piece |
The cable measures 8 inches (20 cm) and converts a 4-pin PSU plug into an 8-pin (4+4) motherboard connector, extending the reach inside the case.
The system will POST and the CPU will receive power through the 18AWG tin-plated copper conductors rated for 300 V and 80 °C.
One adapter cable is supplied; the PVC sheath and mesh sleeve help keep the wiring tidy without additional accessories.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?