Wiper Arm Pullers, Nut Caps and Squeegee Tools

Pullers, nut caps and cleaning tools: what each is for

Three kinds of item sit here. A wiper arm puller lifts a stuck arm off its splined shaft without prying, in sizes such as 15 mm and 30 mm, so check that the capacity covers your arm head. Nut caps cover the retaining nut on a specific model. Extendable squeegee and microfiber tools reach across a windshield, with pads, handle, spray bottle and bag in a kit. Decide which one your job needs; they are not interchangeable.

Fit, glass protection and pad care

Nut covers and caps are made for particular vehicles and often for the front or rear wiper, so check the make, model and year range. Pullers should fit the arm head, and the arm's park position is worth marking before removal; never let a sprung arm snap back onto glass. For cleaning tools, rinse and shake out pads before each pass, since trapped grit scratches. Wash microfiber pads without fabric softener, and replace worn pads.

Questions about Wiper Arm Pullers, Nut Caps and Squeegee Tools

Why use a wiper arm puller instead of prying?

Wiper arms sit on a tapered, splined shaft and can seize with corrosion. A puller applies even force to lift the arm off, while prying can bend the arm, damage the shaft or crack the windshield. Mark the arm's parked position before removing it.

How do I find the right wiper nut cap?

Caps are made for specific vehicles, so check the make, model and year range in the listing, and whether it is for the front or rear wiper. If the fit list is unclear, measure the nut and the cap opening and compare them before choosing.

What length of extendable tool do I need?

Choose a reach that lets you cover the middle of the windshield from the side without leaning on the glass. Telescoping handles of around two feet are typical for cars; a larger vehicle with a tall windshield may need more. Check the retracted length for storage.