We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 RDIMM modules in a row

A-Tech

A-Tech 96GB (6x16GB) DDR4 2133 ECC RDIMM 2Rx4 CL15 1.2V memory upgrade

SKU CH-QGJP-XQ1FV

A 96 GB DDR4-2133 ECC RDIMM kit of six 16 GB modules for Dell PowerEdge 13th-generation rack servers

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR4 2133 (PC4 17000)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL15
  • Rated voltage1.2 V
  • Buffer typeRegistered

Capacity 96GB (6 x 16GB)

Show 4 more

Speed DDR4 2133 (PC4 17000)

  • Boosts server responsiveness with 96GB capacity across six 16GB modules
  • ECC registered design protects data integrity for Dell PowerEdge 13th Gen rack servers
  • DDR4 2133MHz speed at CL15 latency keeps workloads moving smoothly
  • 2V low-voltage operation reduces power draw in compatible R430 through R930 systems
  • 288-pin 2Rx4 registered DIMMs install directly into validated Dell PowerEdge platforms

96GB DDR4-2133 ECC RDIMM Kit

This 96GB kit contains six 16GB DDR4-2133 registered DIMMs built for Dell PowerEdge 13th Generation rack servers. It targets administrators who need to expand memory capacity on supported R430, R530, R630, R730, R730xd, R830 or R930 platforms.

Registered 2Rx4 Modules Without Heat Spreaders

Each 288-pin module uses a 2Rx4 organisation and runs at 1.20V with CL15 latency. The registered design adds a buffer that reduces electrical load on the server memory controller, while the absence of heat spreaders keeps the profile low for dense chassis layouts.

Replaces Lower-Capacity or Mixed-Speed Kits

Installing this uniform 96GB set removes mismatched speeds that would otherwise force the system to run at the slowest module. The upgrade is worthwhile when workloads demand more memory than the current configuration provides and the server model appears in the supported list.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $354.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $3.70 per GB
Cheaper than about 86% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product line13th Gen Dell PowerEdge Rack Server Compatible
Model name96 GB (6 × 16 GB) 2Rx4 DDR4-2133 RDIMM for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
Part numberNE-MS-0059
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR4 SDRAM
Performance
Rated speedDDR4 2133 (PC4 17000)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL15
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930 | 13th Gen Rack Servers
In the box
Included itemsSix Modules
More details
VariantCompatible with Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930

Other versions of this model

5 more in the same range

Questions about this item

What DDR4 standard and speed does this 96GB kit run at, and what bandwidth ceiling does that set?

The modules are DDR4 2133 PC4-17000, so the memory bus tops out at 17000 MB/s per channel.

What physical slot and module count are required to install this 6x16GB kit?

It uses six 288-pin DDR4 DIMM slots; the server must have at least six free slots to take the full kit.

How do you seat these registered ECC modules correctly, and what sequencing mistake do installers make?

Align the notch, press straight down until both clips lock, then follow the server manual's channel population order — skipping the prescribed sequence is the common error.

More in Model-Specific Memory Upgrades

Similar items