Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Fourteen mountable passive speakers deliver 2.5" woofers and 88 dB sensitivity for whole-house or surround sound
The Acoustic Audio AA321B set supplies fourteen passive on-wall speakers designed for multi-room installations, home-theatre surround systems or commercial background music. Each cabinet houses a 2.5" polypropylene woofer and presents an 8 Ω load with 88 dB sensitivity. The sealed ABS enclosures measure 3.5" x 3.5" x 4.5" and are finished in black. They are rated for indoor use only.
Included mounting brackets with hardware allow each speaker to be aimed for even coverage across seating areas or retail zones. Spring-loaded raw-wire terminals accept bare conductor or CL3 cable without soldering. The package also contains an instruction manual. No amplifier, receiver or speaker wire is supplied, so those must be sourced separately.
Installation consists of securing brackets, running CL3 or raw speaker wire from the amplifier to each terminal, and tightening the spring clips. The amplifier must deliver between 20 W and 200 W per channel; exceeding or falling below this range can damage the drivers or produce weak output. Ensure polarity is consistent across all fourteen units to maintain phase coherence.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | On-Wall Speakers |
The terminals use a spring-loaded design that holds bare wire without screws, so no tightening is required.
The amplifier must supply 20 – 200 watts per channel; exceeding that range risks thermal compression or driver damage.
The sealed cabinets dissipate heat passively; with 88 dB sensitivity they run warm but not hot at typical listening levels.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?