Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four passive on-wall speakers deliver 800 W total power with 2.5" woofers and 150 Hz–20 kHz response
The Acoustic Audio AA321B is a set of four passive on-wall speakers rated at 800 watts total system power. Each cabinet measures 3.5" x 3.5" x 4.5" and houses a 2.5" polypropylene woofer. The sealed black ABS enclosures use spring-loaded raw wire connectors and include omni-directional mounting brackets with hardware. Frequency response is 150Hz-20 kHz at 88dB sensitivity and 8 ohms impedance.
This set suits buyers building a surround sound system or a distributed audio installation who have an amplifier or receiver with raw speaker wire outputs. The amp must supply between 20 and 200 watts per channel. Buyers who need powered speakers, wireless connectivity, outdoor-rated enclosures, or a different cabinet finish should look at other models.
Installation uses the supplied omni-directional brackets and hardware; speakers mount directly to the wall and connect via raw speaker wire or CL3 cable. The spring-loaded terminals accept stripped wire ends without tools. The main issues are ensuring the amplifier stays within the 20 to 200 watts per channel window and verifying the speakers are not exposed to outdoor conditions, which they are not rated for.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | On-Wall Speakers |
Each channel must supply between 20 and 200 watts into an 8-ohm load to match the speakers' rated limits.
Yes, the terminals are designed for bare-wire connection, so standard CL3 or raw speaker wire inserts directly without adapters.
Play a familiar 150 Hz – 20 kHz test tone at a moderate volume; clear, balanced output from all four cabinets indicates the drivers are operating within specification.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?