Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A set of three flush-mount in-ceiling speakers with 8-inch woofers, midrange drivers and 13 mm tweeters covering 40 Hz to 20 kHz at 95 dB sensitivity
This Acoustic Audio CS-IC83 set provides a centre, front-right and front-left channel in a flush-mount design. Each unit uses an 8-inch poly-cone woofer, a poly-mica midrange and a 13 mm soft-dome tweeter in a three-way passive crossover network. The speakers suit buyers who want a complete front soundstage that disappears into the ceiling.
Your amplifier or receiver must supply raw speaker-wire outputs rated between 10 and 350 watts per channel at 8 ohms. Installation requires a round hole of 9.45 inches and a mounting depth of 3.78 inches behind the ceiling surface. The overall speaker diameter is 10.83 inches, so verify joist spacing and clearance before ordering.
The 95 dB sensitivity at 8 ohms lets the system reach reference levels without pushing the amplifier into compression. Poly cones with butyl rubber surrounds and progressive spiders maintain excursion control during long sessions, while the passive crossovers keep driver integration stable as voice coils warm. Frequency response stays within 40 Hz to 20 kHz under sustained load.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | In-Ceiling Speakers |
The set contains three in-ceiling speakers with 8" poly woofers, poly mica midranges, 13mm soft dome tweeters, removable paintable grilles and spring-loaded wire terminals. You must supply a home audio receiver or amplifier with raw speaker wire outputs rated between 10 and 350 watts per channel and the speaker wire itself.
All three speakers are identical 3-way units with 40Hz-20kHz frequency response and 95dB sensitivity at 8 ohms. Install one as the centre channel and the other two as front right and left for a matched front soundstage.
It means each speaker produces 95dB output at one metre with one watt of power, so a typical receiver delivering 10-350 watts per channel will drive them to loud, clear levels in a home theatre room.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?