Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Seven in-ceiling speakers with 5.25″ woofers and 12mm tweeters cover 45 Hz to 22 kHz at 95 dB and mount in 6.61″ holes using a tool-free pressure-lock system
This seven-piece flush-mount kit supplies front, centre, rear and surround channels for a complete home-theatre layout. Each unit uses a traditional passive design driven by any receiver or amplifier with raw speaker-wire outputs. The low-profile housings suit both new-build and retrofit installations in ceilings or walls.
The Pressure Lock mounting system clamps each speaker to drywall without separate hardware, fitting a 6.61" cut-out and 2.8" mounting depth. Connections accept raw wire clamp or solder termination, and CL3-rated in-wall speaker wire is recommended for the run back to the amplifier. Allow 10 to 200 watts per channel from the amplifier to match the speaker rating.
A 5.25" polypropylene woofer with butyl rubber surround pairs with a 12 mm soft-dome tweeter in a two-way array covering 45 Hz to 22 kHz at 95 dB sensitivity and 8 ohms. The wide-dispersion pattern fills medium-sized rooms, while the ABS housings and paintable grilles blend with décor. Larger spaces or reference-level output may need additional subwoofer support.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | In-Ceiling Speakers |
Play a full-range test signal and verify clean output from 45 Hz to 22 kHz at the rated 95 dB sensitivity; each driver should handle 10–200 watts per channel without distortion.
The set includes seven in-ceiling speakers with paintable ABS housings, removable grilles, and Pressure Lock mounting clamps; you must supply a home audio receiver or amplifier (10–200 W per channel) and CL3-rated raw speaker wire.
This single SKU provides a fixed 7-speaker configuration with 5.25-inch woofers, 12 mm soft-dome tweeters, and 8-ohm impedance; choose it when you need a complete front-centre-rear surround layout.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?