Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Ten flush-mount speakers deliver 45 Hz–22 kHz coverage through 5.25″ woofers and 12 mm tweeters, clamping into 6.61″ cut-outs without extra hardware
The Acoustic Audio R191 pack supplies ten passive speakers for whole-house audio or home-theatre surround installations. Each unit uses a two-way design with a 5.25-inch polypropylene woofer and a 12mm soft-dome tweeter. The Pressure Lock mounting system clamps to drywall without separate hardware. Grilles can be painted to match the ceiling.
Rated at 95dB sensitivity and 8-ohm impedance, the speakers maintain consistent output during extended listening sessions when driven within the 10-to-200-watt-per-channel window. The butyl rubber surrounds resist fatigue, and the ABS housings dissipate heat without colouration. Frequency response spans 45Hz to 22kHz across the operating range.
Verify that your receiver or amplifier provides raw speaker-wire outputs and can deliver between 10 and 200 watts per channel into 8 ohms. Confirm the ceiling cavity allows a 2.8-inch mounting depth and a 6.61-inch cut-out diameter. Use CL3-rated in-wall speaker wire for the runs from the amplifier to each location.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | In-Ceiling Speakers |
The passive R191 design has no amplifier or fan inside, so it generates no heat and makes no noise of its own; only the connected receiver or amplifier will warm up.
You need a home audio receiver or amplifier with raw speaker-wire outputs that delivers between 10 and 200 watts per channel into 8 ohms, plus CL3-rated in-wall speaker wire for the runs.
Yes, the R191s are rated at 8 ohms and 95 dB sensitivity, matching typical legacy bookshelf models so they can share the same receiver channels without level mismatch.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?