Aile Tech PWM Fan Splitter Cable 1 to 4 10 inch
Connects four PWM fans to one motherboard header with shared speed control and a single RPM signal
- Connect four PWM fans to one motherboard header
- 10 inch length fits tidy internal cable runs
- Single tachometer signal prevents RPM reading conflicts
- All attached fans follow identical PWM speed curve
- Black braided sleeve improves airflow and cable management
PWM Fan Splitter Cable 1 to 4
This Aile Tech cable connects four PWM fans to a single motherboard 4-pin header. It is designed for builders who want to run multiple case or CPU fans from one fan connector while keeping cable routing tidy with the black sleeved braiding.
Suits single-header fan arrays.
Ideal for systems where all fans should spin at the same speed under one PWM signal. Not suited for users who need individual speed curves per fan or separate RPM monitoring for each device, because only the first full 4-pin connector reports a tachometric signal to the motherboard.
Handles four fans on one header at 10 inch length
The 10 inch cable provides enough reach for typical case layouts while delivering identical PWM duty cycles to every attached fan. Headroom ends when the motherboard header current limit is reached or when a build demands per-fan RPM feedback beyond the single reporting connector.
How it compares
Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 93% of the 433 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Which motherboard header do I need to plug this splitter into?
It connects to a standard 4-pin PWM fan header on the motherboard.
Can I mix my older 3-pin fans with newer 4-pin fans on this cable?
Yes, the splitter accepts both 3-pin and 4-pin fan connectors.
How do I confirm the RPM reading is accurate after connecting four fans?
Only the fan plugged into the full 4-pin connector reports RPM; the motherboard reads that single signal.
More in Y-Splitter Power Cables
Similar items
EN-Labs PWM1X3SPL10IN 10 inch PWM 4-pin 1-to-3 fan power splitter cord
- 10 in (25.4 cm)
- Fan power splitter…
SXDOOL Ver005 GPU Mining Breakout Board + 12x 6-Pin to 6+2Pin PCIe Cables
EN-Labs 3PINSPL310 3-pin fan power splitter cord 10 inch
- 25 cm
- 3pin fan power spli…
SXDOOL 16 AWG 8-Pin to Dual 8-Pin (6+2) Power Splitter Cord 30.5 cm 4-Pack
- Case Fan Accessory
HANNORD 1007 1-to-3 PWM fan splitter cable 10.6 in 2-pack
- 10.6 in (26.9 cm)
- 1x TX4 female





