We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
AkiTiO 10G 5-speed PCIe network card with single RJ45 port

AkiTiO

AkiTiO 10G 5-Speed PCIe Network Card

SKU CH-0TSS-TAHKM

A five-speed PCIe card adding 10 Gbps Ethernet over Cat 6a up to 100 m with auto-negotiation down to 100 Mbps

  • Rated speed100 Mbit/s/1 Gbit/s/10 Gbit/s
  • Interface typePCI-Express
  • Connection types1 x RJ45
  • Bus interface64-bit PCI/PCI-X
  • Five selectable speeds from 100 Mbps to 10 Gbps
  • 10 Gbps over 100 m with Cat 6a cabling
  • PCI Express Gen-3 x4 host bus interface
  • 16K Jumbo Frames for larger packet handling
  • IP, TCP, UDP checksum offloading reduces CPU load

5-Speed 10G PCIe Network Card

This AkiTiO card adds a single RJ45 port that negotiates at 10Gbps, 5Gbps, 2.5Gbps, 1Gbps or 100Mbps. It uses the Aquantia AQtion AQC107s controller over a PCI Express Gen-3 x4 host bus interface. The board is suited to workstations and servers that need multi-gigabit wired throughput on existing copper cabling.

Installation notes

The card fits a standard PCI-Express slot and presents a 64-bit PCI/PCI-X bus width. Driver support is required for the AQC107s controller; most modern operating systems include it. Ensure the slot provides an x4 electrical link so the 10Gbps line rate is not bottlenecked. Use Cat-6A cable for full 10Gbps at 100m or Cat-6 for 5Gbps operation.

Who this suits

Builders upgrading a desktop or rack server to NBASE-T speeds without rewiring will benefit from the auto-negotiation and 16K Jumbo Frame support. Buyers who need fibre connectivity, multiple ports, or a lower-profile bracket should look at a different adapter. The single-port design also limits link aggregation scenarios.

How it compares

Measured against everything we stock in Ethernet Cards & NICs, at today’s prices. Recalculated every night.

Price $94.99
Typical for this category: the median of 1,505 items is $90.99.

Specifications

Performance
Rated speed100 Mbit/s/1 Gbit/s/10 Gbit/s
Ports & slots
Interface typePCI-Express
Connection types1 x RJ45
Bus interface64-bit PCI/PCI-X

Questions about this item

How do I confirm the 10 Gbps link is active after installing the AQC107s card?

Check the OS network adapter status or switch port LEDs; they will show a 10 Gbps link when auto-negotiation completes with Cat 6a cabling up to 100 m.

What ships with the card and what must I supply myself?

The card itself is included; you must provide Cat 5e, Cat 6 or Cat 6a patch cables and an available PCI Express x4 slot.

Which speed should I select for my existing Cat 6 cable run?

Cat 6 supports up to 5 Gbps at 100 m; the card will auto-negotiate to 5G, 2.5G, 1G or 100M depending on the link partner.

More in Ethernet Cards & NICs

Similar items