Intel I210T1BLK network card 10/100/1000Mbps PCI-Express
- 10/100/1000 Mbit/s
- EEE 802.3 (10BASE-T…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual-port Gigabit Ethernet adapter with PCIe 2.1 x4 interface and 4.4 W power draw
Model I350T2V2
Ports 2 Ports
The Intel I350T2V2 is a dual-port PCIe 2.1 network card delivering two RJ45 connectors at 10/100/1000Mbps. It targets servers and workstations needing reliable gigabit links for virtualised or iSCSI workloads. The card draws 4.4W and supports Energy Efficient Ethernet plus DMA Coalescing for lower power use. A low-profile bracket is included for compact chassis.
This adapter suits administrators adding gigabit ports to virtualisation hosts or iSCSI storage networks. Flexible I/O virtualisation allows up to 32 virtual ports with QoS. It is not suited for builders who need higher-speed uplinks or fibre connectivity. The PCIe 2.1 x4 interface works in x4, x8 or x16 slots without bridge chips.
The single specification that decides fit is the 4-lane PCIe 2.1 interface operable in x4, x8 and x16 slots. A physical x4 or wider slot is required; x1 slots will not accept the card. Full-height and low-profile brackets measure 12.0 cm and 7.92 cm respectively. Cable distance follows CAT5e or higher for 1000BASE-T operation.
Measured against everything we stock in Ethernet Cards & NICs, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Intel |
| Model name | I350-T2 |
| Part number | I350-T2 |
| Performance | |
| Rated speed | 10/100/1000 Mbit/s |
| Connectivity | |
| Supported standards | EEE 802.3 (10BASE-T, 100BASE-TX, 1000BASE-T) |
| Ports & slots | |
| Interface type | PCI-Express |
| Connection types | 2 x RJ45 |
| Bus interface | Type: PCIe 2.1 (5GT/s) Bus Width: 4-lane PCIe; operable in x4, x8, and x16 slots |
| Size & build | |
| Product dimensions | Length 13.54 cm (5.33 in) Width 6.89 cm (2.71 in) Full-height end bracket 12.0 cm (4.725 in) Low-profile end bracket 7.92 cm (3.117 in) |
| Shipping weight | 0.18 kg |
| Package size | 226 × 142 × 30 mm |
Other versions of this model
The adapter consumes 4.4 W under typical operation, so heat output stays low even during all-day workloads.
You need Category 5e or better copper cable; Cat 5 is sufficient for 100 Mbps and Cat 3 only for 10 Mbps links.
Yes — the board uses a PCIe 2.1 x4 interface and operates in x4, x8 or x16 slots, so a 2.0 x8 slot provides full bandwidth.
More in Ethernet Cards & NICs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?