Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a PCIe 8-pin PSU output to a detachable CPU 8-pin (4+4) or 4-pin motherboard connector using 18AWG sleeved cable 34 cm long
The Alrhso 5478THYU3163 is a 34 cm internal power cable that connects an ATX power supply 8-pin output to a motherboard EPS 8-pin or 4-pin input. Builders extending a short CPU power lead or converting a PCIe 8-pin socket to an EPS-12V connector will find it useful. The detachable 4+4 design fits both 8-pin and 4-pin motherboard headers. It is not for graphics cards; inserting a GPU will cause damage.
The cable uses 1007-18AWG tinned copper wire rated for the EPS-12V specification. Length is fixed at 34 cm, so it only bridges short gaps between PSU and motherboard. It cannot replace a missing PSU 8-pin output, and it does not add extra power phases. Polarity follows the standard EPS pinout; reversing the connectors is not possible.
Route the sleeved cable through the case grommet and press the male 4+4 connector firmly until the latch clicks. The split 4+4 section separates by hand for 4-pin boards; keep the unused half clear of moving fans. The only common error is plugging the female end into a GPU instead of the PSU, which the maker warns will damage the card.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Alrhso |
| Model name | 5478THYU3163 |
| Product color | Black |
| Ports & slots | |
| First connector | 8PIN EPS |
| Second connector | 8PIN EPS |
| Size & build | |
| Cable length | 3 in (7.62 cm) |
Only the 34 cm (13.3 in) length is listed for this model. Choose it when the PSU and motherboard EPS sockets are close together; a longer cable would add slack you do not need.
The 1007-18AWG tinned copper conductors are rated for the current an EPS-12V CPU connector carries, so voltage drop over 34 cm stays negligible for desktop and server CPUs.
One end plugs into an 8-pin PSU output; the other splits into 4+4 pins that fit either an 8-pin EPS or a 4-pin P4 motherboard socket, but the cable is not wired for graphics cards.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?