D-Link DHP-309AV Powerline Networking AV500 Mini Adapter Starter Kit
- 10/100Base RJ-45
- IEEE802.3/3u, HomeP…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 48 V PoE into 5 V 2.4 A micro USB power plus 100 Mbps ethernet for non-PoE devices up to 328 feet
This two-pack provides 48V to 5V PoE splitters that convert IEEE 802.3af input into 5V DC power and 10/100Mbps ethernet data. Each unit delivers up to 2.4A at 12W through a micro USB connector. The splitters enable non-PoE devices to receive power and data over a single ethernet cable run up to 100 metres.
Ideal for deploying non-PoE network devices where no mains outlet exists, provided they accept 5V micro USB power and 10/100Mbps ethernet. Not suitable for gigabit-only hardware such as Raspberry Pi 3B+ or any device requiring 802.3at/bt power levels or a different DC connector.
The 5V 2.4A supply comfortably powers most 5V micro USB cameras, tablets and Pi boards within the 100Mbps data budget. Headroom disappears with higher-draw peripherals or multi-device hubs, and the 10/100Mbps link caps throughput well below gigabit speeds.
Measured against everything we stock in Powerline Adapters & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | ANVISION |
| Model name | AV-PS05-1 |
| Connectivity | |
| Connection method | USB |
| Ports & slots | |
| Interface type | Ethernet |
| Size & build | |
| Product weight | 0.12 kg |
| More details | |
| Powerline speeds | 100 Mbit/s |
| Connection speeds | 100 Mbit/s |
The splitter requires an IEEE 802.3af compliant PoE switch or injector delivering 44 to 56 V DC over a shielded RJ-45 connection.
No, the splitter only supports 10/100 Mbps non-PoE devices and explicitly does not support gigabit models such as the Raspberry Pi 3B+.
Measure the micro USB plug with a multimeter; it should read 5 V DC at up to 2.4 A (12 W maximum) when the PoE source is active.
More in Powerline Adapters & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?